1108

Home > Subaru > BRZ / 86 > BRZ / 86 Type3

BRZ / 86 Type3

  • Flywheel Power: 180kw / 240nm (98 octane fuel)
  • Price: $5,295
  • Model Compatibility: Subaru BRZ / Toyota 86
  • Installation Time: 2 day
 

"Good power gains, noticeable power and torque increase across the board, with zero down sides. The hardware used is absolute art work!!"

The BRZ / 86 Type3 upgrade starts with our trained technician fitting a  a complete Mishimoto cold air intake kit including air box and air box inlet. We then add the Invidia Q300 (Invidia N1 is a no cost option) stainless steel catback exhaust, Invidia high flow metallic cat mid pipe and Tomei’s premium ‘Expreme’ equal length Headers and over pipe (Tomei unequal headers are a no cost option) to increase the over all engines breathing capabilities, we then tune your vehicle’s ECU on the dyno in real time utilizing the latest Subaru ECU tuning software to maximize power, torque and fuel efficiency. We complete the upgrade process by testing your vehicle on the road to make final adjustments, optimizing your vehicles performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the ‘before’ power & torque and the ‘after’ increase the HPF BRZ / 86 Type3 upgrade has made to your vehicle.

Like all HPF upgrade packages the Type3 package is modular in that it allows the customer to add to the package minimising the requirement to spend money twice when and if further upgrades are desired. HPF strive to bring you maximum performance with high quality components while still maintaining reliability and driveability.

PLEASE NOTE : The Horsepower Factory (HPF) has no affiliation with Toyota or Subaru and service offered by our company may impact on your vehicle manufacturer warranty as well as the fuel efficiency and emissions of your vehicle.

Package Includes

BRZ / 86
1 x Before dyno run
1 x Mishimoto kit cold air intake kit
1 x Invidia Q300 catback exhaust
1 x Invidia metallic high flow cat ‘Mid pipe’
1 x Tomei Expreme Header and ‘Over pipe’
1 x HP-Flash PCM Retune
1 x Labour to fit, tune and test
$5,295

More Information:

Click here to learn how to read a dyno graph.

HPF Warranty

HPF power packages are warranted for the parts and services installed by HPF. Please contact us for more information.

Additional Notes

  • We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • Modifications such as this package require the vehicle to be in excellent mechanical order.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.

21 Comments please add yours...

  1. avatar

    Is this set up VicRoads legal or will I require an Engineering Certificate after install?

  2. avatar

    Hi,
    Do you have any affiliated workshops that can offer this setup in Sydney?

  3. avatar

    Would the automatic show similar gains also is there an e85 option for the auto as well?

  4. avatar

    Hi do you offer any financing options for payment?

  5. avatar

    Hello , do you do an e85 tune manual Toyota 86 , would prefer keeping exhaust stock . Thanks

  6. avatar

    Hi,

    How fast will the Toyota 86 after type 3 tune go from 0-100?

  7. Is it going to tune it 180kw at the wheels or just the overall engine combined power will be tuned upto 180kw ?

  8. avatar

    Hi there I have a performance air intake on my BRZ from Mishimoto would I have to change it for the HKS suction kit or keep it?
    will I still have the power gain without it or do I need it?
    Here is the website http://www.mishimoto.com/subaru-brz-performance-air-intake-2013.html

  9. avatar

    Hey, I was wondering if this kit will still make the 86 and/or brz p plate legal.

    • avatar

      Hi,

      Whilst I’m not 100% familiar with the P-plate vehicle requirements, its my thoughts that it will still be ok. I would advise you to do your research though.

Post a Comment

Post with your Facebook account, or fill in below:

Connect with Facebook




HPF Group