STAGE 3 | 245kW

Product Code: #70 SERIES 4.5L STAGE 3 | 245kW
Install Time: 2 Days
Model Compatibility: Landcruiser 2007-2018 70 SERIES 4.5L
Note: This product can only be fitted at Horsepower Factory in Dandenong


202 hp
329 hp
126 hp
430 Nm
317 ft-lb
750 Nm
553 ft-lb
+320 Nm
236 ft-lb

70 SERIES 4.5L | STAGE 3 | 245kW

The Landcruiser 70 Series 4.5L Stage 3 starts with our trained technician fitting a TorqMax Turbocharger upgrade as one of the limiting factors when upgrading the 4.5L engine is the size of the standard turbocharger which dictates the peak power and torque the engine is capable of. The TorqMax turbocharger has addressed this by upgrading the compressor inducer wheel with a 15% larger wheel machined from a solid billet. The new wheel features extended tip technology and a 13% smaller hub diameter which makes the blade surface larger giving the blades even more area to draw air in. We also upgraded the thrust bearing to improve longevity.

This all adds up to a super efficient, more responsive and ultimately more reliable turbo capable of flowing well over 20% more air with zero downsides. The TorqMax turbocharger is also based of the factory turbo so it’s a direct fit and requires no other modifications to install.

We then replace the restrictive factory Snorkel head with a larger 3.5" hi-flow Safari unit along with Manta 3" Stainless steel exhaust system to also increase the engines breathing capabilities. We also fit a Process West SEPR8R Air Oil Seperator to capture oil mist entering your engines inlet manifold which can build up in your engines intake and cause a carbon build.

We complete the package by custom tuning your vehicles ECU on the dyno in real time utilizing the latest ECU tuning software to maximize power, torque and fuel efficiency and testing your vehicle on the road to make final adjustments, optimizing your vehicles performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the before and after power & torque increase the upgrade has made to your vehicle.

Package Includes

1 x TorqMax Turbocharger upgrade
1x Manta 3" Turbo back exhaust
1x Process West Sepr8r Catch Can
1x Safari 3.5" Snorkel head
1 x Custom ECU - reprogram
1 x Before and after dyno graph
1 x Labour to fit, tune and test

Options :

  • Clutch Industries 4-Terrain Ultimate ER2 Clutch kit - $1975 Installed
  • NPC Heavy Duty Clutch Kit - $2350 Installed

Key Features

The Stage 2 package addresses the next level of components that limit power; generally this will be a turbocharger and associated hardware upgrade. The turbocharger upgrade is aimed at increasing air flow into the engine; this allows extra fuel to be added for more power and torque throughout the rev range. We still maintain our ‘reliability first protocol’ which maintains safe air fuel ratios and low EGT’s. You will note that the Stage 2 package may not include what is traditionally thought to be ‘essential diesel upgrades’ but rest assured, if it’s needed, it will be in the Stage 2 package.


  • Important - Manual transmission vehicles will require a clutch upgrade to handle the additional torque.
  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only.

Enquire Here