HPF Stage 5 | 550kW

From $16,791.00
Product Code: #FGX / FPV S/C 5.0L | HPF Stage 5
Install Time: 5 days
Model Compatibility: FGX - FPV GT, GS Supercharged V8
Note: This product can only be fitted at Horsepower Factory in Dandenong

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
315kW
422hp
550kW
738hp
+235kW
+315hp
TORQUE
545Nm
402ft-lb
720Nm
531ft-lb
+175Nm
129ft-lb
POWER
STANDARD 315 KW
422 hp
DYNO CHIPTUNING 550 KW
738 hp
DIFFERENCE +235 KW
315 hp
TORQUE
545 Nm
402 ft-lb
720 Nm
531 ft-lb
+175 Nm
129 ft-lb

FGX / FPV S/C 5.0L | HPF Stage 5 | 550kW

The FGX/FPV GS, GT & GT-P Supercharged Boss 5.0L Stage 5 package starts with our trained technicians expertly fitting a new dual 60mm throttle body setup and K&N air filter along with a water to air intercooler system and a new high boost top pulley & hub. We then fit a new set of high flow fuel injectors, a high flow fuel pump and high flow fuel pump regulator and finish the mechanical upgrades with free flowing dual 4 into 1 headers high flow catalytic converters and a new high flow cat back exhaust system and a high flow air filter to meet the demands of the additional horsepower. Once all the components are fitted, we custom tune your vehicle's ECU on the dyno utilizing the latest HP Tuners Ford ECU tuning software to maximize power, torque and fuel efficiency.

We complete the upgrade process by testing your vehicle on the road to make final adjustments, optimizing your vehicle's performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the before and after power & torque increase the HPF upgrade has made to your vehicle.

Package Includes

1 x Before dyno run
1 x Water to air intercooler system
8 x High flow fuel injectors
1 x Twin 60mm throttle body kit (including intake casting, throttle body rubber ducting)
1 x High flow air filter
1 x High boost supercharger snout and top pulley upgrade (61mm)
1 x 1000hp high flow fuel pump
1 x High flow fuel pressure regulator
1 x 4 into 1 headers & high flow cats
1 x Stainless steel cat back exhaust
1 x HP Tuners custom dyno tune
1 x Labour to fit, tune and test

Package Options

Dual 2.5" stainless steel catback exhaust to suit Ute with Single outlet
Dual 2.5" stainless steel catback exhaust to suit Sedan with RH & LH Quad tips (Extra Charge)

Key Features

This package is only for the brave with truly brutal performance...

Notes

  • *Please note: Power figures are estimates only and actual figure's may vary.
  • We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • Modifications such as this package require the vehicle to be in excellent mechanical order.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only

Enquire Here