HPF STAGE 2 | 220kW

$3,400.00
Product Code: #FOCUS ST HPF STAGE 2 | 220kW
Install Time: 1 Day
Model Compatibility: Ford Focus ST
Note: This product can only be fitted at Horsepower Factory in Dandenong

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
184kW
247hp
220kW
295hp
+36kW
+48hp
TORQUE
360Nm
266ft-lb
440Nm
325ft-lb
+80Nm
59ft-lb
POWER
STANDARD 184 KW
247 hp
DYNO CHIPTUNING 220 KW
295 hp
DIFFERENCE +36 KW
48 hp
TORQUE
360 Nm
266 ft-lb
440 Nm
325 ft-lb
+80 Nm
59 ft-lb

FOCUS ST HPF STAGE 2 | 220kW

The Focus ST Turbo Stage 2 upgrade starts with our trained technician fitting a Process West Cold air intake system with a high flow air filter along with a stainless steel 3" Cat back exhaust system to increase the engines breathing capabilities, we then tune your vehicles ECU on the dyno, maximizing all parameters including Boost control, Fuel and Ignition timing.

We complete the upgrade process by testing your vehicle on the road to make final adjustments, optimizing your vehicles performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the before and after power & torque increase the HPF upgrade has made to your vehicle.

Like all HPF upgrade packages the Stage 2 package is modular in that it allows the customer to add to the package minimising the requirement to spend money twice when and if further upgrades are desired. HPF strive to bring you maximum performance with high quality components while still maintaining reliability and driveability.

Package Includes

1 x Before dyno run
1 x Process West Cold Air Intake
1 x 3" Stainless steel Cat back exhaust
1 x ECU reprogram - Factory ECU
1 x Labour to fit, tune and test

Key Features

Unleash the real potential! Good power gains, noticeable power and torque increase across the board and that performance exhaust note.

Notes

  • We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
  • *Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • Modifications such as this package require the vehicle to be in excellent mechanical order.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only.

Enquire Here