Forester Xt 12
Invidia Forester Xt 09 12
Invidia 09 12 Xt10 11 Wrx
Pw Forester Xt 08 Intercooler

HPF STAGE 3 | 276KW

$6,950.00
Product Code: #FORESTER XT 09-12 | HPF STAGE 3 | 276KW
Install Time: 3 Days
Model Compatibility: Forester XT 09-12 2.5L
Note: This product can only be fitted at Horsepower Factory in Dandenong
Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
169kW
227hp
276kW
370hp
+107kW
+143hp
TORQUE
320Nm
236ft-lb
500Nm
369ft-lb
+180Nm
133ft-lb
POWER
STANDARD 169 KW
227 hp
DYNO CHIPTUNING 276 KW
370 hp
DIFFERENCE +107 KW
143 hp
TORQUE
320 Nm
236 ft-lb
500 Nm
369 ft-lb
+180 Nm
133 ft-lb

FORESTER XT 09-12 | HPF STAGE 3 | 276KW

The Subaru Forester MY09-12 Stage 3 upgrade starts with our trained technician fitting a cold air intake and high flow air filter. The factory intercooler is replaced with a Process West Verticooler, giving cooler intake temps to make the engine breathe. Finally we complete the package by fitting a stainless steel 3" turbo back exhaust system.

We then tune your vehicle's ECU on the dyno in real time utilizing the latest Subaru ECU tuning software to maximize power, torque and fuel efficiency. We complete the upgrade process by testing your vehicle on the road to make final adjustments, optimizing your vehicle's performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the before and after power & torque increase the HPF upgrade has made to your vehicle.

Package Includes

1x Before dyno run
1x Process West cold air intake
1 x Process West top mount "Verticooler"
1x Invidia turbo back exhaust system
1 x HP-Flash PCM retune
1 x Labour to fit, tune and test

Key Features

Convert your Subie into a giant killer! Monstrous power and torque whilst retaining great on road manners.

Notes

  • *Please note: Power figures are estimates only and actual figure's may vary.
  • We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • Modifications such as this package require the vehicle to be in excellent mechanical order.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only.

Enquire Here