HPF STAGE 1 | 205KW

$2,250.00
Product Code: #FORESTER XT 13-18 | HPF STAGE 1 | 205KW
Install Time: 1 day
Model Compatibility: Forester XT 13-18 2.0L
Note: This product can only be fitted at Horsepower Factory in Dandenong

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
177kW
237hp
205kW
275hp
+28kW
+38hp
TORQUE
350Nm
258ft-lb
405Nm
299ft-lb
+55Nm
41ft-lb
POWER
STANDARD 177 KW
237 hp
DYNO CHIPTUNING 205 KW
275 hp
DIFFERENCE +28 KW
38 hp
TORQUE
350 Nm
258 ft-lb
405 Nm
299 ft-lb
+55 Nm
41 ft-lb

FORESTER XT 13-18 | HPF STAGE 1 | 205KW

The Subaru Forester XT MY13-18 Stage 1 upgrade starts with our trained technician fitting a Mishimoto cold air intake to increase the engine's breathing capabilities. We then tune your vehicle's ECU on the dyno in real time utilizing the latest Subaru ECU tuning software to maximize power, torque and fuel efficiency.

We complete the upgrade process by testing your vehicle on the road to make final adjustments, optimizing your vehicle's performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the before and after power & torque increase the HPF upgrade has made to your vehicle.

Like all HPF upgrade packages the Stage 1 package is modular in that it allows the customer to add to the package minimising the requirement to spend money twice when and if further upgrades are desired. HPF strive to bring you maximum performance with high quality components while still maintaining reliability and driveability.

Package Includes

1 x Before dyno run
1 x Mishimoto cold air intake
1 x HP-Flash PCM retune
1 x Labour to fit, tune and test

Key Features

Good power gains, noticeable power and torque increase across the board, with zero down sides.

Notes

  • *Please note: Power figures are estimates only and actual figure's may vary.
  • We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • Modifications such as this package require the vehicle to be in excellent mechanical order.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only.

Enquire Here