STAGE 1 TOW | 180KW

From $3,645.00
Product Code: #PX 3.2L STAGE 1 TOW | 180KW
Install Time: 1 Day
Model Compatibility: RANGER PX1-PX3 3.2L
Note: This product can only be fitted at Horsepower Factory in Dandenong

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
147kW
197hp
180kW
241hp
+33kW
+44hp
TORQUE
470Nm
347ft-lb
630Nm
465ft-lb
+160Nm
118ft-lb
POWER
STANDARD 147 KW
197 hp
DYNO CHIPTUNING 180 KW
241 hp
DIFFERENCE +33 KW
44 hp
TORQUE
470 Nm
347 ft-lb
630 Nm
465 ft-lb
+160 Nm
118 ft-lb

PX 3.2L | STAGE 1 TOW | 180KW

The Ranger PX 3.2L Stage 1 Tow pack upgrade is ideal for vehicles towing heavy loads and Includes the fitment of a larger front mount intercooler.

The package starts with our trained technician fitting a Process west front mount intercooler as the standard Intercooler is logically positioned at the front of the vehicle but the sizing of the intercooler and the unreliability of the intercooler hoses are not ideally suited for sustained hard driving or towing, as such we recommend a new heavy duty, larger capacity intercooler and piping kit. The much larger intercooler is more able to control the heat generated when towing or off-roading and the silicone intercooler hoses are significantly stronger than the factory rubber hoses thus maintaining the engines power and reliability in all situations.The intercooler is a worthy consideration as we have seen a 40 degree drop in intake temperatures after installation!

We then fit a Process West SEPR8R Air Oil Seperator to capture oil mist entering your engines inlet manifold which can build up in your engines intake and cause a carbon build.

We complete the package by custom tuning your vehicles ECU on the dyno in real time utilizing the latest ECU tuning software to maximize power, torque and fuel efficiency and testing your vehicle on the road to make final adjustments, optimizing your vehicles performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the before and after power & torque increase the upgrade has made to your vehicle.

Package Includes

1 x Process West Intercooler 700 x 247 x 75mm Upgrade
1 x Process West CNC mandrel bent intercooler piping
1 x SEPR8R Air oil separator catch can
1 x Custom ECU - reprogram
1 x Before and after dyno graph
1 x Labour to fit, tune and test

Key Features

The Stage 1 Tow package addresses the next level of components that limit power; generally this will be a Intercooler and associated hardware upgrade. The Intercooler upgrade is aimed at maintaining our ‘reliability first protocol’ which maintains safe air fuel ratios and low EGT’s. You will note that the Stage 1 Tow package may not include what is traditionally thought to be ‘essential diesel upgrades’ but rest assured, if it’s needed, it will be in the Stage 1 Tow package.

Notes

  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only.

Enquire Here