HPF | STAGE 4 | 300KW

$10,500.00
Product Code: #STI 08-18 HPF STAGE 4 | 300KW
Install Time: 3-4 Days
Model Compatibility: 2008-2018 STI 2.5L
Note: This product can only be fitted at Horsepower Factory in Dandenong

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
221kW
296hp
300kW
402hp
+79kW
+106hp
TORQUE
407Nm
300ft-lb
530Nm
391ft-lb
+123Nm
91ft-lb
POWER
STANDARD 221 KW
296 hp
DYNO CHIPTUNING 300 KW
402 hp
DIFFERENCE +79 KW
106 hp
TORQUE
407 Nm
300 ft-lb
530 Nm
391 ft-lb
+123 Nm
91 ft-lb

STI 08-18 | HPF STAGE 4 | 300KW

The Subaru WRX MY09-14 Stage 4 upgrade starts with our trained technician fitting a cold air intake and high flow air filter, a Blouch Dominator 1.5XT-R turbocharger, Process West top mount intercooler along with a COBB silicone intake pipe and 3 port boost control solenoid. We then increase fuel supply by fitting a high capacity fuel pump and ID1050X fuel injectors. Finally we complete the package by fitting a stainless steel 3" turbo back exhaust system. We then tune your vehicle's ECU on the dyno in real time utilizing the latest Subaru ECU tuning software to maximize power, torque and fuel efficiency.

We complete the upgrade process by testing your vehicle on the road to make final adjustments, optimizing your vehicle's performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the before and after power & torque increase the HPF upgrade has made to your vehicle.

Package Includes

1x Before dyno run
1x Process West cold air intake
1 x Process West top mount intercooler
1 x Blouch Dominator 1.5XT-R turbocharger
1x Cobb silicone turbo inlet
1x 3-port boost solenoid
1x DW E85 in-tank fuel pump
4x ID1050X fuel injectors
1x Turbo back exhaust system
1 x HP-Flash PCM retune
1 x Labour to fit, tune and test

Key Features

Convert your Subie into a giant killer! Monstrous power and torque whilst retaining great on road manners.

Notes

  • *Please note: Power figures are estimates only and actual figure's may vary.
  • We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • Modifications such as this package require the vehicle to be in excellent mechanical order.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only

Enquire Here