HPF Stage 2 | 320kW

$2,695.00
Product Code: #VT-VZ V8 HPF Stage 2 | 320kW
Install Time: 1 Day
Model Compatibility: VT-VZ V8 Commodore & HSV
Note: This product can only be fitted at Horsepower Factory in Dandenong

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
235kW
315hp
310kW
416hp
+75kW
+101hp
TORQUE
465Nm
343ft-lb
515Nm
380ft-lb
+50Nm
37ft-lb
POWER
STANDARD 235 KW
315 hp
DYNO CHIPTUNING 310 KW
416 hp
DIFFERENCE +75 KW
101 hp
TORQUE
465 Nm
343 ft-lb
515 Nm
380 ft-lb
+50 Nm
37 ft-lb

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
235kW
315hp
315kW
422hp
+80kW
+107hp
TORQUE
465Nm
343ft-lb
600Nm
443ft-lb
+135Nm
100ft-lb
POWER
STANDARD 235 KW
315 hp
DYNO CHIPTUNING 315 KW
422 hp
DIFFERENCE +80 KW
107 hp
TORQUE
465 Nm
343 ft-lb
600 Nm
443 ft-lb
+135 Nm
100 ft-lb

VT-VZ V8 HPF Stage 2 | 320kW

The VT-VZ Stage 2 upgrade starts with our trained technician fitting an over the radiator cold air intake with a high flow re-usable air filter and a new dual 3" cat back exhaust system all to increase the engines breathing capabilities and to give it that nice V8 sound we all love. After all the new performance components are fitted we custom tune your vehicles ECU on the dyno utilizing the latest tuning software to maximize power, torque and fuel efficiency.

We complete the upgrade process by testing your vehicle on the road to make final adjustments, optimizing you vehicles performance and driveability. This is all completed in a day and at the end of this upgrade you will be provided with a dyno graph detailing the power & torque increase of your vehicle.

Package Includes

1 x Dual 3" cat back exhaust system, mandrel bent mild steel
1 x HPF over the radiator cold air intake
1 x High flow reusable air filter
1 x Intake Air Temp patch harness
1 x Intake Air Temp sensor
1 x ECU - reprogram
1 x Before and after dyno graph
1 x All labour to fit / dynotune / test

Key Features

Good power gains, noticeable power and torque increase across the board and that great V8 sound!

Notes

  • We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • Modifications such as this package require the vehicle to be in excellent mechanical order.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only

Enquire Here